Let’s suppose that you are now ready to turn your home improvement project into a reality. It doesn’t matter whether you’ve bought a house that needs a lot of remodeling or you’ve finally thought of renovating the house like the one dreamed of. Whatever the case might be, you should not overlook remodeling the flooring of your house.
Installing floors in the house is not a DIY undertaking at all. It requires experience, expertise, and a lot of patience. One wrong move, and you might have to tear down all the floor and start over again. So, experts highly suggest that you always hire one of the best local flooring companies near you when considering a hardwood flooring installation project.
Come to think about it, when you search online for the top flooring companies near you, you’ll be surprised to see that a lot of companies are claiming to be your best bet for it. However, not all of them will be able to proffer up to the mark services. Why? Well, the answer is simple! This is because they do not have an ample amount of working experience plus they do not have access to the right tools of the trade.
Did you know that according to NWFA, there are more than 50 tools that a hardwood flooring company ought to have? We’ve managed to narrow down the list to 10 important tools for hardwood flooring installation.
Important Tools For Hardwood Flooring Installation
When it comes to the hardwood floor installation project, the local flooring companies must have the following 20 tools if you want the flooring project to go as smoothly as possible.
Note: Most of the mentioned tools will also be used during the finishing process, but we’ve managed only to focus on the installation process for now.
#1: The Safety Goggles
The former thing that you want to risk is the health and safety of yourself and your loved ones, right?
So, if you are going to stick around the house, make sure that you have safety goggles with you. This is because you’d never know when wood pieces come flying at you and hit you right in the eye which can cause permanent damage. Make sure that the workers of local flooring companies are wearing them too.
#2: The Dust Mask
Installation of hardwood floor requires sanding to avoid inflammation and also it can cause shortness of breath. Therefore, it is highly suggested that one should wear a vapor respirator and a dust mask. The dust mask will protect the lungs from wood dust.
#3: The Ear Plugs
We all know that long exposure to a lot of loud noise can cause hearing loss. Wearing high-quality earplugs will be beneficial. This is because a saw can create noise up to 100 decibels. This is enough to damage the internal mechanism of the ear in just a couple of minutes.
A lot of hardwood floor installers have become victims of hearing loss since they’ve never taken such precautions.
#4: Knee Pads
Knee pads are important because, to be honest, the workers ought to spend much of their time on their knees. The knee pads prevent the workers from pain and strain.
Don’t worry about the knee pads damaging the surface of the floors, is the outer layer of knee pads is made of cloth.
#5: Safety Boots
When it comes to installing floors, the danger to the feet is quite obvious. A flooring expert must wear slip-resistant shoes, have safety toes, and need to be well cushioned. Athletic shoes are not at all recommended. So, if you see a worker wearing them, you need to ask them to change them or leave the worksite.
#6: Gloves
Now that your knees and feet are well protected, protecting your hands holds the same significance.
Gloves that have reinforced fingertips are highly recommended for such jobs.
#7: The Feather Boards
The workers of the local flooring companies need to use a feather board to push the stocks past the cutting edges whenever they have to use the table saw. The board does not only create a smoother cut but it also prevents the hand from kicking back when it gets near to the table saw’s blade.
#8: Testers (Electrical)
Too little or too much power can burn the motor of your machines, which is why you need to have an electrical tester with you at all times. This will help the workers to know if their machines can be operated safely or not.
#9: Moisture Meters
Did you know that determining the content of moisture in the hardwood flooring is vital for a job well done? If the hardwood planks have a lot of moisture, they’ll start to show cracks, and start to bulk after it has been installed!
#10: RH Testing System
If you plan on installing hardwood flooring on a slab of concrete, it is important to know the moisture level of the slab. If there is a lot of moisture in the slab, the hardwood will not stick to it, the wood will crack, or even start to bulk.
Final Thoughts
The above-mentioned tools will help the expert of the top local flooring companies to ensure that the hardwood flooring project is done in the best possible way. Also, keep in mind that most of the tools can be rented from the local hardware stores near you. If the experts do not have some of the tools, you can lease them for their convenience.
Leave a comment